NEWS

NEWS

NEWS

Your location:
Homepage
/
/
/
Selection requirements of glass beveling machine grinding mechanism

Selection requirements of glass beveling machine grinding mechanism

  • Categories:Company news
  • Author:
  • Origin:
  • Time of issue:2020-05-27
  • Views:103

(Summary description)There are many glass beveling machine grinding mechanisms, we must choose some main items when choosing, the following mainly introduces the selection requirements for diagonal positioning device, gear box, support frame, conveying guide rail and guide rail beam, grinding wheel and motor skateboard.

Selection requirements of glass beveling machine grinding mechanism

(Summary description)There are many glass beveling machine grinding mechanisms, we must choose some main items when choosing, the following mainly introduces the selection requirements for diagonal positioning device, gear box, support frame, conveying guide rail and guide rail beam, grinding wheel and motor skateboard.

  • Categories:Company news
  • Author:
  • Origin:
  • Time of issue:2020-05-27
  • Views:103
Information
  There are many glass beveling machine grinding mechanisms, we must choose some main items when choosing, the following mainly introduces the selection requirements for diagonal positioning device, gear box, support frame, conveying guide rail and guide rail beam, grinding wheel and motor skateboard.
  (1) Diagonal positioning device.
The cylinder of the diagonal positioning device must be strong, the brand name should be reliable, and the structure is reasonable and easy to adjust. Otherwise, the service life is short, adjustment is difficult, and positioning is inaccurate.
  (2) Gear box.
  1. The gearbox must have sufficient thickness. Because the synchronous belt wheel is installed on the gear box, there is not enough thickness. Under the long-term working conditions, the synchronous belt wheel is easily pulled by the synchronous belt to cause the gear box to deform. Once the gear box is deformed, it will cause poor contact of the bevel gear; early wear , And it will cause premature bearing damage, so that the whole machine does not work well, or even cannot work.
  2. The gearboxes are mostly driven by bevel gears (bevel gears). The forces on this gear are axial, radial and normal. In order to save costs, some manufacturers use a deep groove ball bearing, which is extremely wrong. Because deep groove ball bearings can only bear radial forces, such bearings will cause premature bearing wear, increased clearance, unstable gear transmission, and increased noise, making it impossible to work. The correct design is to use a pair of tapered roller bearings, so that the design is reasonable.
Keyword:

Scan the QR code to read on your phone

FOSHAN ADDTECH GLASS MACHINERY CO.,LTD

FOSHAN ADDTECH GLASS MACHINERY CO.,LTD

 

Address: B, No. 3, Shilong Avenue, Lunjiao, Shunde District, Foshan City, Guangdong Province
Switchboard:0757-23620488
Fax:0757-22618498
Domestic sales:0757-27888334
Domestic sales:0757-27881334
Phone:13924832889

longli

Sweep and follow us

Copyright © 2020 FOSHAN ADDTECH GLASS MACHINERY CO.,LTD      粤ICP备12345678       Powered by:300.cn​